- How To Install
- Help / FAQ
Our matte clear bezel skins are the absolute best way to protect the bezel of your Pebble Time Steel without changing the appearance of your watch. Our protectors are precision-cut out of the highest quality materials and will protect the bezel of your Pebble Time from bumps, scrapes, and scratches. Installation is really simple (it's a "wet" install) and your Pebble Time Steel's bezel (frame of screen) will now be protected!
Our matte clear bezel skin is a precision cut "ring" that will cover up the thin metal bezel (the frame that goes around your Pebble Time Steel screen) to protect it from scratches. The material is clear so your original color will show through but it's matte so it completely blocks all fingerprints.
No. These aren't meant to hide the color of your watch. They are meant to protect the bezel of your Time Steel while leaving the color unchanged.
Yes! We have personally tested all of our wraps in the shower, saltwater (the Persian Gulf, Pacific Ocean, Atlantic Ocean), fresh water and chlorine pools. They are completely waterproof and will not come off. If your skin does come off over time (or is damaged, needs to be replaced), we have a lifetime replacement warranty which enables you to get a discounted replacement wrap at any time.
Yes! If at any time you damage your skin, it comes off, it gets gunked up, etc. you can contact us using the warranty page to request a replacement. All you have to do is pay $1 for your wrap plus shipping and you'll get a replacement shipped to you. Keep in mind, however, that you will only get a replacement for the skin that you purchased. You can't get a DIFFERENT skin shipped to you as a replacement.
They can definitely be removed and they definitely WILL NOT damage your watch. After a few days your skin will bond in such a way that if you remove it the skin will be stretched and it will make it impossible to reinstall.
With every matte clear skin purchased you will receive (1) wet-install bezel protector that will cover the front metal bezel of your Time Steel. This WILL NOT cover the screen. If you need screen protection please check out our Pebble Time Steel Full Clear Protector.
It does not seem as straightforward as it was shown on the YouTube guide, especially for a first timer and only ordered 1 item of that, Did not get it exactly right on the watch edges. Fiddling a lot on that. Done it eventually, it's not perfectly fitted but acceptable for me, first time round! brian on Jan 18th 2017
Perfect against chocs, resistant, really thin, easy to put it on. Matt on Nov 3rd 2016
No complaints - this is a great product that does exactly what it says it will...it's virtually invisible, completely unobtrusive and does the job it's supposed to...it stops scratches on the vulnerable bezel of my Time Steel.
And the Customer Service from Gadget Wraps is excellent... Jason on Aug 7th 2016
This is not my first purchase from Gadgetwrap, so I know perfectly what to expect from them. This skin proved itself to be just as good as the ones I ordered for my old Pebble Time Steel : sturdy, crystal clear and easy to install. I didn't expect the bezel skin to fit so easily and to look so nice, but it sure does. Only complain I have about it (so little that it didn't even deserve the star less on this review) is that if, as in my case, you're not extremely precise on putting the inner skin, it will "overlap" with the bezel one, creating a little air bubble around the corners. You just have to be extra-careful on putting the on screen one, as I will do on my next order. Unknown on Jun 5th 2016
This is not my first purchase from Gadgetwrap, so I know perfectly what to expect from them. This skin proved itself to be just as good as the ones I ordered for my old Pebble Classic: sturdy, crystal clear and easy to install. I didn't expect the bezel skin to fit so easily and to look so nice, but it sure does. Only complain I have about it (so little that it didn't even deserve the star less on this review) is that if, as in my case, you're not extremely precise on putting the inner skin, it will "overlap" with the bezel one, creating a little air bubble around the corners. You just have to be extra-careful on putting the on screen one, as I will do on my next order. Francesco Romano on May 4th 2016
The customer service is top notch. Easy to install getting a new watch will order again Unknown on Mar 29th 2016
I love how easy these are to install and how well they protect my pebble. Being a clear matte skin, it allows my pebble to look like there's nothing in it at all. Highly recommend these to anyone who wants to add extra protection to their pebble time steel. Kerri on Feb 9th 2016
At first I was sceptical about the ease of installation and end result claims - no more! Installation went smoothly and the end result is virtually undetectable- I have one small bubble near the edge - that I probably could have smoothed out in the first day or so but everything has set up firmly now. I bought this for my replacement Pebble Time Steel after a gentle bump against a granite counter at just the right angle cracked my first one - so far so good. Now if only they made full edge to edge skins for the iPhone 6+ - I refuse to put on those glass protectors that add a new edge and leave the original edges exposed - too ugly. Scott Blyth on Jan 21st 2016
Application was easy, as long as we follow the online video instruction. After it dried completely, it is almost transparent. Great to know that the Pebble is protected yet maintaining the original design. Unknown on Oct 27th 2015
I bought this together with my screen protector. The wet-installation of this bezel skin is harder than installing the screen protector. I had a hard time aligning the edges. Even my installation was not perfect, I still like the result as it is quite invisible while offering my PTS a great protection. I should have bought two of this! :-) littlejohn on Oct 26th 2015