- How To Install
- Help / FAQ
Our Pebble Time Steel Clear protectors are precision-cut out of military-grade materials and will protect the glass screen of your Pebble Time Steel from bumps, scrapes, and scratches. It's self-healing so most marks will go away over time. We sell them in two-packs so you'll receive two self-healing screen protectors. Installation is really simple (it's a "wet" install) and your Pebble Time will now be fully protected.
We cut our protectors from a crystal clear military grade material that is self-healing and made to last. It is a wet install and it won't come off until you want to remove it (which is very easy). Most dings will go away on their own.
No. These aren't meant to hide the color of your Pebble Time. They are meant to protect the front of your watch while leaving the color unchanged.
With every 2-pack purchased you will receive (2) wet-install self-healing screen protectors that completely cover the front glass of your Pebble Time Steel. These do not cover the stainless steel bezel "frame" of your Pebble Time Steel.
Yes! We have personally tested our Original Pebble wraps and protectors in the shower, saltwater (the Persian Gulf, Pacific Ocean, Atlantic Ocean), fresh water and chlorine pools. They are completely waterproof and will not come off. The Pebble Time Steel Full Protector is made out of the same material as the Original Pebble which has been game-tested for 2+ years by tens of thousands of customers all over the world. If your protector does come off over time (or is damaged, needs to be replaced), we have a lifetime replacement warranty which enables you to get a discounted replacement protector at any time.
Yes! If at any time you damage your Pebble Time protector, it comes off, it gets gunked up, etc. you can contact us using the warranty page to request a replacement. All you have to do is pay $1 for your protector plus shipping and you'll get a replacement Pebble Time full protector shipped to you. Keep in mind, however, that you will only get a replacement for the protector/skin that you purchased. You can't get a DIFFERENT protector/skin shipped to you as a replacement.
It can definitely be removed and it definitely WILL NOT damage your watch. After a few days your protector will bond in such a way that if you remove it the protector will be stretched and it will make it impossible to reinstall.
Before this, I already bought some similar protectors from Slickwraps and they ended up looking terrible - I contacted them for support with no replies. So I turned to Gadgetwraps to see if it will be different this time. On my first install, It definitely looked better than the one on SW because this one is full-screen (the SW only covers the inside of the screen) but still a bit weird on the surface. So I contacted GW with little hope that this would go anywhere good. Surprisingly, GW contacted me right away and answered my mail with enthusiasm. I found out the reason why it looked that way was because I came from Vietnam, a country with hot and humid weather, which made it harder to install the protector. Just like what GW promised on their description page, they sent me a replacement kit with advices on how to install in my weather condition. So again thank you GW for the great support and service, you guys know how to keep your customers loyal! :)
Luong Nguyen on Jan 11th 2017
Very easy to apply. Once dry virtually invisible. Looked rubbish when I first put it on, but after a couple of days looked really good. Highly recommended. Unknown on Jan 11th 2017
Arrived quickly and exactly as described. Fit perfectly on my watch and looks great! Make sure to follow the video tutorial on installation. Unknown on Jan 9th 2017
At first I've been skeptical thinking about wet application but I must say the reality is convincing enough. No need to polish for hours, to apply antistatic, to consider airflow... just spray some water and fit the shield at leisure.
After application several glitches were noticeable but they disappeared with time and now it's seamless and smooth.
And without this wet method I don't think I'd be able to apply bezel protector as well. Was correcting it for several hours after applications noticing some sharp edges here and there but in the end it's also seamless. Ruslan on Jan 9th 2017
I started looking for screen protectors in the UK until I read reviews that recommended the Gadgetwraps ones, especially given the fact that shipping is very fairly priced (the same as some local shipping) and it only takes about a week to get here. I would rather pay a bit extra for a quality screen protector than a cheap pack that look awful and don't last; you've just bought a nice looking watch so look after it!
Was easier to fit than I thought it would be, I'm used to fitting 'dry fit' phone protectors so the wet method was new but just take your time and it'll look perfect. Claire on Jan 7th 2017
The glasss of my watch was scratched and I don´t found the way to fixed it. Anyway I bought your product and It fixed. Amazing Jesús on Jan 4th 2017
Love this screen shield. On one hand, seems invisible on the watch (no one can tell it's there), and on the other, it gives shiny look to the glass. Aviv on Jan 2nd 2017
The screen protector is a great add for your smart watch. I had a small scratch on my Pebble Time Steel and now with the screen protector in place, it's gone. Very durable too! I've had it on my watch for about a month now and with my normal bumps and scrapes, the screen protector is still in pristine condition. Take your time, follow the instructions and you'll have a perfect installation. Errol on Dec 25th 2016
Rather easy to install (you really have to follow the instructions, though), there were a few bubbles that disappeared after a few days, and now it looks great. And it is great protection for the screen of the watch! Unknown on Dec 14th 2016
Bought my PTS two weeks ago and gadgetwraps was recommended from many review pages I've read. I'm glad I picked them over all the other random brands I see online. Probably one of the easiest to apply screen protector I've purchased yet!
I've always dread applying screen protectors on my devices as dust and bubbles has always been the biggest headache. I've noticed a few bubbles when I install it last night, but as was mentioned in the how-to videos, they were gone the next morning!
Thanks for making such an awesome product! Will definitely return when I upgrade my other devices :) Tracy on Nov 20th 2016